Working it out
A US gallon is exactly 231 cubic inches. The 10% allowance covers resin left in mixing buckets, small leaks and resin absorbed by the wood. Live-edge channels are rarely the same width end to end, so measure the width every 6–12 inches and use the average.
Pours and mix by product
| Epoxy | Max per pour | Pours needed | Per pour | Ratio | Resin | Hardener |
|---|---|---|---|---|---|---|
| TotalBoat ThickSet Fathom | 2 in | 2 | 26.0 L | 2:1 | 9.14 gal | 4.57 gal |
| TotalBoat ThickSet Cast + Coat | 0.5 in | 5 | 10.4 L | 1:1 | 6.86 gal | 6.86 gal |
| EcoPoxy FlowCast | 1.5 in | 2 | 26.0 L | 2:1 | 9.14 gal | 4.57 gal |
| MAS Deep Pour ⚠ more than one full kit per layer — MAS advises thinner pours for large slabs | 0.5 in | 5 | 10.4 L | 3:1 | 10.29 gal | 3.43 gal |
| Stone Coat Woodshop Ultra Deep ⚠ mix in batches of no more than 5 gal | 3 in | 1 | 51.9 L | 2:1 | 9.14 gal | 4.57 gal |
Maximum depths are the manufacturers’ figures at normal room temperature; some apply only up to a set volume per pour (EcoPoxy FlowCast: 30 L) or to moulds (Stone Coat’s 3 in per layer), and Stone Coat says not to mix more than 5 gallons at a time. Larger volumes and warmer rooms reduce the safe depth. Mix ratios are by volume.
Similar sizes
- 84 × 12 × 2 in — 9.60 gal (36.3 L)
- 96 × 8 × 2 in — 7.31 gal (27.7 L)
- 96 × 12 × 2 in — 10.97 gal (41.5 L)
Pour within the label. Pouring deeper than a product’s rated depth can overheat and crack the epoxy. Follow the instructions and safety data sheet for your product.
Last reviewed: 2026-10-04 · Disclaimer